碘化阶层孔氧化硅纳米球对水中典型有机氯污染物的吸附性能研究

采用共缩聚法,成功地原位合成了碘改性的阶层多孔氧化硅纳米球（SiO₂-I）,研究了其基于卤键作用对典型有机氯污染物六六六的吸附性能,并考察了改性剂I-硅烷含量和pH值对吸附效果的影响.实验结果表明,该纳米材料对六六六表现出优异的吸附富集性能,吸附速率快,60 min内对六六六的去除率为71.6%,240 min内达到吸附平衡,去除率可达98.3%,最大吸附量为178.6 mg·g^-1;吸附动力学符合拟二级动力学模型;碘物种的加入提高了阶层多孔氧化硅的吸附速率和吸附效率.另外,为了便于纳米吸附材料的分离,本研究对SiO₂-I纳米球进行了磁性化.研究发现,磁性化修饰后,SiO₂-I纳米材料仍然保留对六六六优异的吸附富集性能,240 min时的吸附去除率达90.3%.     

基于VBA的轻轿汽车滚形轮辋工艺设计系统

利用VBA开发了轻轿汽车滚形轮辋工艺设计系统。利用该系统,可以快速准确地进行轮辋下料尺寸以及工艺设计的自动计算。此程序在轮辋工艺设计中具有较大的现实意义。     

冷轧带钢在线磨辊辊面粗糙度的实验研究

对影响磨削辊面粗糙度的因素进行了系统分析和实验研究 ,得出了轧辊转速、砂轮速度、砂轮粒度、磨削液等因素对磨削辊面粗糙度影响的一般规律 ,利用回归分析的方法建立了粗糙度的数学模型     

电气设备触电危险因素分析

我国现阶段生产、生活中触电事故增加，采用故障树的分析方法，对用电设备触电事故进行危险因素分析，得出保护接地在供配电系统中的重要作用。简要介绍保护接地，并指出目前我国用电设备保护接地中存在的问题及接地故障的防范措施。     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

Development of chemically produced hydrogen energy-based impact bonding process for dissimilar metals

There has been a growing demand in the fabrication of dissimilar metal parts for application in the automotive, aerospace, defense, chemical and nuclear industries. Welding of dissimilar materials can be accomplished via impact welding, which can minimize the formation of a continuous inter-metallic phase, while chemically bonding dissimilar metals. This paper discusses an innovative technique for bonding dissimilar metals by chemically produced hydrogen energy by reacting aluminum powder and water. Experiments were carried out to study impact bond characteristics using copper and stainless steel cylindrical billets. The influence of nosed flyer billet angle and billet mass on bonding characteristics were studied. The test results have demonstrated that the nosed flyer billet angle has significant influence on wavy bond patterns at the interface. Among the three flyer billet nose angles of 9°, 12° and 15°, the billets with a flyer angle of 15° resulted in a complete wave morphological pattern along the whole sample cross-section. This study shows the potential of developing a cost effective system/machinery where discrete metal parts can be bonded at near net shape.     

载钯螯合树脂的制备、表征及其降解多溴联苯醚的初步研究

以聚丙烯醛-异烟酰腙螯合树脂为高分子载体, 利用其活性基团对钯的选择性富集分离性能, 将金属元素钯键合到高分子载体上, 制备一种含钯树脂材料(树脂1), 并进一步原位还原得到还原态的载钯树脂(树脂2)。利用红外光谱、扫描电镜和X射线衍射等对以上2种含钯树脂材料进行了分析表征，并考察了它们对持久性有机污染物(POPs)多溴联苯醚(PBDEs)的脱溴降解性能。结果表明,2种树脂对BDE₂₀₉均有降解活性， 其中树脂1的降解性能比树脂2的降解性能要高， 树脂中钯的氧化形态可能对BDE₂₀₉的催化降解起主要作用。     

Thermodynamics of interaction of lindane on silty loam and silty clay loam Indian soils

Abstract

Interaction of lindane with silty loam and silty clay loam soils was studied in batch tests at 23, 30 and 37° C. Sorption experiments were carried out at four concentrations and for varying time of contact upto 72 hours. This was followed by desorption studies. No desorption was observed. The sorption data was analysed using sorption equations and evaluating the thermodynamic parameters. The sorption was found to be predominantly entropic in nature and a combined effect of adsorption and chemisorption. The effect of organic matter and other chemical and mineralogical constituents of soils has also been discussed. The sorption with single application of lindane with the two soil types indicates that the insecticide is less likely to reach groundwater.     

Opponents,waverers or supporters: the influence of place-attachment dimensions on local residents' acceptance of a planned biosphere reserve in Austria

A supportive attitude of residents towards protected areas is crucial for successful implementation and management, particularly in densely populated regions such as Central Europe. While previous studies have revealed that emotional and cultural drivers, as well as information level and group membership, can influence attitudes towards protected areas, the effect of place-attachment dimensions remains unclear. A postal survey among local residents (N = 460) explored factors influencing attitudes towards the Lungau (-Nockberge) Biosphere Reserve in Austria before its official recognition. Results indicated societal support throughout all socio-demographic strata. A logistic regression showed that, besides socio-demographics and information level, place attachment had a significant influence on the acceptance of the biosphere reserve. Supporters and opponents showed both high place identity and dependence, while waverers scored low on these dimensions. Results indicate that place attachment is relevant for the design of participatory processes as well as for developing management policies for biosphere reserves.     

利谷隆在土壤中的吸附过程与机理

利谷隆是一种广泛应用的除草剂。本文研究了它在４种不同理化特性土壤中的吸附过程（平衡吸附所需的时间,土壤ｐＨ的影响及吸附等温线）和在单离子饱和粘土矿物上的吸附机理,结果表明：利谷隆在土壤的吸附强度大（Ｋｔ值在３．８８－９３．８４）;达到吸附平衡的短（５ｈ）;ｐＨ值降低,有利于吸附,ｐＨ在４－６范围内变化较明显;另外,利谷隆在土壤中形成氢键、配位键及离子键是可能的。